Fire resistant glass, also known as fire-rated glass, is a specialized type of glazing that is designed to withstand intense heat and flames for a predetermined period of time.
As a reputable manufacturer of fire-rated glass, we are proud to offer a...
Published:
May 17, 2024Viewed:
660 (+1)
Total views (+ views today)
The VPInstruments 3 Phase Power Meter is a highly accurate power meter for your permanent power measurements. With the power meter, you can measure the voltage and current of all three phases. Get the complete picture as the sensor provides power, vo...
Published:
September 02, 2022Viewed:
1067 (+1)
Total views (+ views today)
The VPFlowScope® Probe is the number one measurement tool for compressed air audits and fixed installations. You can combine the probe with two display module types or a connector cap without a display. With the VPFlowScope Probe, you can measure vir...
Published:
September 02, 2022Viewed:
871 (+1)
Total views (+ views today)
VRMT are proud to be part of the worldwide drive to help the glass container sector reduce their CO2 Emissions. Our virtual reality training system connects countries across the planet and can help to reduce the need to travel, allowing for IS machin...
Published:
November 11, 2021Viewed:
2049 (+1)
Total views (+ views today)
It is a crystal porous material which stores moisture within itself and that is used to adsorb water vapor inside the spacer bar between two glasses in the thermal insulation system. These crystals are characterized by a three-dimensional pore system...
Published:
December 04, 2020Viewed:
1466 (+1)
Total views (+ views today)
The FT53 TOP PAL model is an automatic system to apply and thermoshrink a sheet of plastic film on the top of a load.
This model satisfies the need to hermetically and mechanically protect the top of the load subject to tear due to stacking and ensu...
Published:
December 02, 2020Viewed:
1533 (+1)
Total views (+ views today)
Expertise: Welding & Maintenance
RS7 – Mould Grinding is a solution for surface and hollow grinding of moulds. Hollow grinding is carried out by copying a template (scale of 1/10).
Thanks to its jointer assembly and magnetic holder, the mould is pe...
Published:
September 01, 2020Viewed:
2288 (+1)
Total views (+ views today)
ROSS® poppet valves are the product of choice for the all the major container plants globally. With its proven reliability and performance plus consistent switching times it has proven itself over many decades in this challenging and unforgiving envi...
Published:
May 05, 2020Viewed:
1436 (+1)
Total views (+ views today)
CT and CTS Series.
VERTICAL WASHING MACHINES CLOSED ON TOP.
When stored, glasses are usually exposed to the risk of being scratched due to the dirt that deposits on them during processing.
This problem can be solved by using a CT or CTS series w...
Published:
April 16, 2020Viewed:
1082 (+1)
Total views (+ views today)
SGD Pharma is launching the first application to identify non-compliances in molded glass bottles intended for the pharmaceutical industry.
Available for free from the Apple Store and the Play Store, it only takes you a few clicks to create your a...
Published:
January 27, 2020Viewed:
2016 (+1)
Total views (+ views today)
Oxygen systems provided by Global Combustion are supplied to meet the specific needs to that customer.
Construction can be made from either customer specific fabrication and assembly drawings. or Global Combustion’s own designed fabrication and ass...
Published:
August 30, 2019Viewed:
1805 (+1)
Total views (+ views today)
VitroGLO-UP is a NEW generation of Low NOx gas burners for application to a Glass Melting Furnace. They are designed to operate at low gas pressures, and provide a highly luminous adjustable flame. The flame length is adjustable (by up to 30%) by mea...
Published:
August 20, 2019Viewed:
2151 (+1)
Total views (+ views today)
YUTONG glass laminating line is designed to be automatic from loading till unloading.
Automatic loading system can register multi positions. The washing machine speed can reach 12m/min.
Numeric-Mechanic combined registration, high-speed vacuum shutt...
Published:
January 09, 2019Viewed:
2333 (+1)
Total views (+ views today)
Luben Glass burners are engineered with gas-air or gas-oxygen mixing systems, making them highly versatile for applications requiring controlled flames. They are ideal for reheating glass items and maintaining consistent temperatures during transfer ...
Published:
April 23, 2026Viewed:
118 (+0)
Total views (+ views today)
The IPS control unit has been specifically engineered for industrial applications that demand the use of high-pressure hydraulic oils. Its advanced design allows it to achieve exceptionally high operating pressures while maintaining stable and precis...
Published:
December 11, 2025Viewed:
152 (+0)
Total views (+ views today)
Conveyor belts manufactured from solid woven Kevlar for extreme, high temperature applications.
Available in all Kevlar, Kevlar / stainless steel, Kevlar / PBO, Kevlar / Fiberglass.
Stocked in common widths up to 36 Inches (914mm). We offer f...
Published:
December 05, 2025Viewed:
244 (+0)
Total views (+ views today)
This sandblaster is designed for use with a wide variety of abrasives and a broad range of applications. Typical tasks include:
✔️ Descaling and cleaning of molds
✔️ Satin finishing and smoothing
✔️ Finishing of metal and non-metal products
✔️...
Published:
December 02, 2025Viewed:
153 (+0)
Total views (+ views today)
The UMC is an essential tool for anyone aiming to raise production quality standards through proactive monitoring of wear on critical equipment such as mould holders, neck ring arms, and more.
Equipped with a simplified human–machine interface, t...
Published:
October 30, 2025Viewed:
221 (+0)
Total views (+ views today)
For over 40 years, Luben has been supporting the glass container industry, working closely with mould makers and repair workshops worldwide.
Our long experience gives us a deep understanding of mould manufacturing and maintenance challenges, allo...
Published:
October 13, 2025Viewed:
240 (+0)
Total views (+ views today)
450 G-2 is specially designed highly accurate digital IR Fibre Optic pyrometer which provides high performance and low maintenance of non contact temperature measurement of molten glass in Glass industries for melting tank, Fore hearth, Feeder and Wo...
Published:
May 27, 2025Viewed:
625 (+0)
Total views (+ views today)
P250 and P450 are specially designed portable IR pyrometer for non contact temperature measurement between 210°C to 3000°C in demanding industrial environments. The Instruments feature high accuracy.
The mul functional bright back light additiona...
Published:
May 27, 2025Viewed:
613 (+0)
Total views (+ views today)
The P-GM+ (Portable Glass Mould Pyrometer) is a hand held, battery powered Non-Contact pyrometer designed primarily for the measurement of mould temperatures in container glass industry. It gives an instantaneous reading of the temperature and data l...
Published:
May 27, 2025Viewed:
633 (+0)
Total views (+ views today)
High Temperature Furnace monitoring thermal camera system AST TE-750, TE-750/OV, TE-1100 & TE- 1100/OV provides wide angle view of burner flames, material alignment & other process conditions with temperature in furnace, kiln, boiler, cooler, reheati...
Published:
May 27, 2025Viewed:
537 (+0)
Total views (+ views today)
Shear Blades for I.S. Machines
Application: Used for cutting molten glass gobs in glass container manufacturing.
Key Specifications:
• Material: HSS or Stellite
• Thickness Range: 1.2 mm to 1.6 mm
• Length: Customized as per machine make/model
•...
Published:
May 13, 2025Viewed:
995 (+0)
Total views (+ views today)
Press mold manufactured using high-quality materials such as UK31R, FAM, and APX-V.
With over 16 years of industry expertise, Burakcan Glass Mold stands as a leading manufacturer of high-quality glass molds, serving both domestic and international c...
Published:
May 06, 2025Viewed:
1474 (+0)
Total views (+ views today)
Mold polishing: a difficult and delicate job
That's right, polishing container molds is a difficult, tedious and at the same time delicate job because it requires skill and patience, a job for which it is increasingly difficult to find skilled wo...
Published:
March 10, 2025Viewed:
734 (+0)
Total views (+ views today)
The rotary table blasting units are designed for the treatment of the surface of moulds and pieces without any need for positioning or anchoring means.
Suitable for cycles with both ceramic abrasive and special abrasive in 18/10 stainless steel mic...
Published:
March 04, 2025Viewed:
492 (+0)
Total views (+ views today)
For years, Luben Glass has been manufacturing and supplying its customers with gob cut lubrication systems designed to guarantee maximum reliability and made with high quality components.
Luben Glass is well aware that lubricating the gob cutting b...
Published:
January 22, 2025Viewed:
498 (+0)
Total views (+ views today)
Cavity Polishing Machine CPM 400: a High-Performance Solution for advanced Mould Cavity Polishing in the Glass Container Industry, delivering Unmatched Efficiency, Versatility, and Ease of Use
The CPM 400 is engineered for versatility and designed t...
Published:
January 20, 2025Viewed:
686 (+0)
Total views (+ views today)
OSCAR Scanning System, the first AI-powered solution of its kind in the glass container industry, replaces traditional manual inspections with automated precision, delivering accuracy and efficiency never before achieved. This latest AI revolution in...
Published:
December 11, 2024Viewed:
882 (+0)
Total views (+ views today)