RS6 - Mould Drilling

SONICAM RS6 – Mould Drilling Machine has been especially designed to drill tiny vacuum channels inside the moulds and also to clear the blocked existing vent holes.
RS6 – Mould Drilling Machine is equipped with three drill heads. Two horizontal drill heads along the same axis and a third one fixed at 90° to ensure perfect alignment of vent holes.
The main benefit of RS6 – Mould Drilling Machine is to drill very tight vent holes of 0.3 – 0.8mm perpendicular to any part of a mould including the shoulder and any engraved / embossed areas with no risk of breaking the tools inside the hole thanks to the 360° swivel table.
Two additional drill heads enable to drill or to tap ensuring a perfect alignment of vent holes either vertically or horizontally.